HOME
 
 
 
Credit Terms Apply
 
AMTDA
 
GSA
 
AMT
 
 
Surface Grinders
Manual Ballway Surface grinder Specifications
     
 
Table Working Surface (T-Slot, 0.4375 " Width) 19" x 8" (483 x 203 mm)
Longitudinal Table Travel 21" (533 mm)
Crossfeed Table Travel 9.25" (235 mm)
Work Height
(Distance from top surface of table to centerline of spindle) 		Min: 3.125" (79 mm)
Max: 19.625" (498 mm)
Vertical Handwheel Graduation 0.0001" - 0.05" / rev (0.002 mm - 1 mm / rev)
Optional Fine Feed: 0.0001" - 0.001" / rev (0.001 - 0.03 mm/rev)
Crossfeed Handwheel Graduation 0.0001" - 0.1" / rev (0.025 mm - 3 mm / rev)
Optional Fine Feed: 0.0001" - 0.002" / rev (0.02 - 0.05 mm / rev)
Grinding Wheel Size 8" x 0.75" x 1.25" (200 x 19 x 31.75 mm)
Optional with 5 HP: 10" x 0.75" x 3" (245 x 19 x 76.2 mm)
Spindle Speed - Belt Drive (Optional) 2,850 RPM / 60 Hz, 2,375 RPM / 50 Hz
Spindle Speed - Direct Drive
(Standard)		 3,450 RPM / 60 Hz (2,875 RPM / 50 Hz)
Optional with 5 HP: (1725 RPM / 60 Hz (1440 RPM / 50 Hz)
Electrics 110 volt control voltage - 230v, 3-phase*
Spindle Motor 2 HP / 3,450 RPM / 3-phase
Optional: 5 HP / 1725 RPM / 3-phase
Floor Space 68" x 45" (1727 x 1143 mm)
Height 67" (1700 mm)
Net Weight 1796 lbs. (817 kg)
   

*575V 3ph, 380V 3ph, 415V 3ph, 460V 3ph, 208V 3ph and 50Hz available at additional charge.

Specifications are subject to change without prior notice.

 
     
     
     
     
 
©2006 KO LEE. All rights reserved. website developed and hosted by northern valley communicatons