KO LEE - Hydraulic Surface Grinder with Automatic Downfeed Specifications

Surface Grinders
Hydraulic Surface Grinder with Automatic Downfeed Specifications

Table Working Surface (T-Slot, 0.4375 " Width)	19" x 8" (483 x 203 mm)
Longitudinal Table Travel	20" (508 mm)
Crossfeed Table Travel	9.25" (235 mm)
Work Height (Distance from top surface of table to centerline of spindle)	Min: 3.125" (79 mm) Max: 19.625" (498 mm)
Vertical Handwheel Graduation	0.0001" - 0.05" / rev (0.002 mm - 1 mm / rev)
Crossfeed Handwheel Graduation	0.0001" - 0.1" / rev (0.025 mm - 3 mm / rev)
Grinding Wheel Size	8" x 0.75" x 1.25" (200 x 19 x 31.75 mm)
Spindle Speed - Direct Drive	3,450 RPM / 60 HZ (2,875 RPM / 50 HZ)
Longitudinal Table Speed	0" to 75 ft. / min. (0 mm to 23M .min)
Electrics	NFPA standard: 230 / 460v, 3-phase*
Spindle Motor	2 HP / 3,450 RPM / 3-phase
Hydraulic Pump Motor	1 HP
Floor Space	68" x 45" (1,7277 x 1,143 mm)
Height	67" (1,700 mm)
Net Weight	1600 lbs. (726 kg)

575V 3ph, 380V 3ph, 415V 3ph and 50 Hz available at additional charge. Specifications are subject to change without prior notice.*