HOME
 
 
 
Credit Terms Apply
 
AMTDA
 
GSA
 
AMT
 
 
cylindrical grinding machines - C13PC2 Specifications
     
 
TABLE Distance Between Centers 17" 432 mm
Swing Over Table 11.5" 292 mm
Table Swivel + / - 10° + / - 10°
Table Traverse Length 20" 500 mm
Feed Rate 0.01 - 200" / min. 0.25 - 5,080 mm / min.
Maximum Weight Between Centers 125 lbs. 56 kg
MPG Jog Increments (mm) 0.00005" (0.0012 mm)
0.0001" (0.002 mm)
0001" (0.025 mm) 		0.00005" (0.0012 mm)
0.0001" (0.002 mm)
0001" (0.025 mm)
HARDSTOCK
STANDARD		 Electronic Variable Speed Range 10 - 300 RPM 10 - 300 RPM
Headstock Swivel 135" 135"
Center Taper 5 MORSE / 3 MORSE 5 MORSE / 3 MORSE
Through Hole I/D 1.3" 33 mm
Live and Dead Center Standard Standard
Horsepower 1/3 HP 0.25 KW
ELECTRONICS NFPA Standard 230/V 3ph 60 HZ 230/V 3ph 60 HZ
TAILSTOCK Center Taper 2 MORSE 2 MORSE
Spring Tension Adjustable Standard Standard
WHEELHEAD Wheel Size 8" x 1" x 1.25" 220 x 25 x 31.75 mm
Horsepower 2 HP 1.5 KW
Wheel Speed 2,840 RPM 2,840 RPM
Spindle Taper 3" per ft. (std. B&S) 3" per ft. (std. B&S)
Swivel (set at 60/60) +90° / -10° +90° / -10°
CROSSFEED Feed Rate 0.01" - 100" / min. 0.25 - 2,540 mm / min.
Maximum Travel 8" (203 mm) 8" (203 mm)
MPG Jog Increments (mm)

0.00002" (0.0005 mm)
0.0001" (0.002 mm)
0.001" (0.025 mm)

0.00002" (0.0005 mm)
0.0001" (0.002 mm)
0.001" (0.025 mm)
STANDARD EQUIPMENT
• Diamond Dresser
• Wheel & Wheel Collet
• Coolant System
• Worklight 		• Instruction Manual
• Wrenches
• Leveling Pads
• Centers
OPTIONAL
EQUIPMENT
• I.D. Attachment
• Crossfeed Glass Scale
• Optional Voltages Available 		• 3, 4 & 6 Jaw Chucks
• 5C Collet System
DIMENSIONS Spindle Centerline to Floor 49" 1,250 mm
Floor Space Required
(width x depth) 		90" x 72" 2,286 x 1,828 mm
Net Weight 1,544 lbs. 70 KG
Shipping Weight 1,850 lbs. 840 KG
Specifications are subject to change without prior notice.
       
       
 
 
©2006 KO LEE. All rights reserved. website developed and hosted by northern valley communicatons