Economy Surface Grinding Machine

8" x 18" Capacity

Economical and easy to operate, these manual surface grinders offered the accuracy of more expensive surface grinders, with the same quality features.

These features included slip-ring handwheel dials, a removable cartridge-type spindle with two pair of duplex spindle bearings, and a 2-HP dynamically balanced motor.

The Ballway model grinders were equipped with hardened and ground ways. The system used precision steel balls.

The machine was built in China.

Standard Features
__________________________

Adjustable table stops with stop block
8" x 3/4" x 1 1/4" (200 x 19 x 31.75 mm) grinding wheel
One-shot lube system
Leveling pads
Diamond dresser
Full cast iron construction
Hardened and ground ways with precision steel balls
Adjustable worklight
Limited one-year warranty
Wheel guards and wheel collet
Permanent magnet chuck
Coolant attachment
Wheel balancer, arbor and stand
Direct drive spindle, 3450 RPM
230 volt, 3 phase, 60Hz with 110 volt control voltage

SPECIFICATIONS

Table Working Surface (T-Slot, 1/2" bolt)	19" x 8" (501 x 203 mm)
Longitudinal Table Travel	23" (584 mm)
Crossfeed Table Travel	9.12" (232 mm)
Work Height - Maximum Distance from top surface of table to centerline of spindle	17.87" (454 mm)
Vertical Handwheel Graduation	0.0002" - 0.05"/rev (0.004 mm - 1.3 mm/rev)
Crossfeed Handwheel Graduation	0.0005" - 0.01"/rev (0.015 mm - 3 mm/rev)
Permanent Magnetic Chuck	8" x 16" (203 x 406 mm)
Grinding Wheel Size	8" x 0.75" x 1.25" (200 x 19 x 31.75 mm)
Spindle Speed	3450 RPM / 60 Hz
Electrics	NFPA standard: 230/3-ph 60 Hz, 110 V. control voltage
Spindle Motor	2 HP / 3450 RPM / 3-phase / 60 Hz
Floor Space	73" x 46" (1854 x 1168 mm)
Height	64" (1626 mm)
Net Weight	1898 lbs. (860 kg)